degreasing weld spatter
remove mildew
Industrial Cleaning Products
Weld Anti-Spatter
Cleaning Applications
FAQ Anti-Spatter
About Anti-Spatter
Contact Safe-N-Clean
Newsletter
Employment
MSDS
Spatter Mist Anti-Spatter
stain removal
Newsletter Sign Up
(Industry Updates, Product Updates, News and More!)
Email Address:
cleaner
industrial cleaner degreaser
bilge  cleaning
metal cleaning
September 07, 2010

Bilge Cleaning:

Approximately 8 gallons of Safe-N-Clean will disperse 70 gallons of oil from ship's bilge. Agitate with 80 to 100 gallons of fresh or salt water. If at sea, the roll of the ship will agitate the solution sufficiently. If in harbor, beat it up with high pressure water until the oil goes into solution. When the cleaner has completely absorbed the lube oil, the mixture should look milky, and be removed. Safe-N-Clean is very efficient on bunker "C" type fuel oil.

Safe-N-Clean is very effective as a hand wiping material in cleaning the engine room where fuel, oil, smoke, etc. are a problem. Mix Safe-N-Clean 1 part to 10 parts water and wipe down the area with a wet cloth. No rinsing or further wiping is necessary. Safe-N-Clean is excellent for swabbing down decks and bulkheads. It will not damage paint or wooden surfaces, and helps prevent rust on exposed surfaces. This mixture should be 1 part Safe-N-Clean to 20 parts water.

Small amounts of Safe-N-Clean can be induced into the ship's ventilation system by an atomizing spray to dispel foul air or orders. A mixture of 1 part Safe-N-Clean to 10 parts water will effectively remove stack gases. For use in ships laundry, as a hand cleaner or as a general purpose cleaner on board ship, see the appropriate sections of this brochure.

Steam Cleaning & Hot Water Pressure WasherBathrooms: (Floors, walls, sink, toilet bowl, etc).
Heavy Equipment DegreasingMachine Shops
Rust & Corrosion on Metal SurfacesHotel and Restaurant Cleaning
Eliminate Weld SpatterLubricant
Manufacturing Floor CleanerHand Cleaner
Marine & Shipping IndustryBilge Cleaning
Remove Mildew from Water CraftsAutomotive Cleaning: Trailers, Engines
Safe Cleaning of Plastic SurfacesFloor Scrubbing Machines
Missile WashingElectrical Equipment
Dust ControlWater Treatment
Safe Cleaning of Walls, Woodwork and WindowsMetal Cleaning, Removal of Mill & Processing Oil
USDAFloors
Laundry Compound and Spot RemoverRugs and Carpets
Safe Effective Spot & Stain RemovalGeneral Purpose Cleaner

There are many more applications for Safe-N-Clean Industrial Cleaner Degreaser. When in doubt, try a test spot. On smooth surfaces, spray on and wipe off is usually sufficient. On grained or rough surfaces or where exceptionally difficult stains or soils are encountered, some agitation with an appropriate brush may be required. Where applicable, always wash from the bottom up and rinse from the top down. This will prevent streaking.
Info © 2003 SAFE-N-CLEAN • 2281 Graystone Drive • St. Charles, MO 63303 • info@safenclean.com
Toll-Free: 800.253.7426 • Phone: 636.925.3821 • Toll Free Fax: 800.635.9398 • Fax: 636.925.3865
Design ©2010 / Maintenance provided by jWeb New Media Design