|
|
|
 |
September 08, 2010 |
 |
 |
 |
 Automotive Cleaning: Trailers, Engines:
Cars and Truck Cabs 1 to 2 ounces per gallon of water makes an excellent shampoo that rinses streak and spot free.
Cleaning Trailers where road film, insects, salt cinders and diesel smoke are a problem, use 1 part Safe-N-Clean to 30 parts water and agitate with a soft bristle brush, until soil is loose. Rinse with clear high pressure water.
Cleaning Engines use 1 part Safe-N-Clean to 5 parts water, let stand 20 minutes, and rinse with high pressure water.
Cleaning Truck Wheels extremely dirty engines, and undercarriage, mix 1 part Safe-N-Clean to 1 part water and 6 parts Stoddard solvent. Spray on and let stand for 15 to 20 minutes, then rinse with clear high pressure water.
Cleaning Tire White Walls use Safe-N-Clean 1 to 5 with water, and agitate with stiff bristle brush.
Cleaning Radiators add 1 cup of Safe-N-Clean to water in radiator, let circulate for a week, and then change water.
|
| There are many more applications for Safe-N-Clean Industrial Cleaner Degreaser. When in doubt, try a test spot. On smooth surfaces, spray on and wipe off is usually sufficient. On grained or rough surfaces or where exceptionally difficult stains or soils are encountered, some agitation with an appropriate brush may be required. Where applicable, always wash from the bottom up and rinse from the top down. This will prevent streaking. |
|
|
 |
 |
Info © 2003 SAFE-N-CLEAN • 2281 Graystone Drive • St. Charles, MO 63303 • info@safenclean.com
Toll-Free: 800.253.7426 • Phone: 636.925.3821 • Toll Free Fax: 800.635.9398 • Fax: 636.925.3865
Design ©2010 / Maintenance provided by jWeb New Media Design |
 |
|
