|
|
|
 |
September 05, 2010 |
 |
 |
 |
 Floor Scrubbing Machines:
In industrial plants use Safe-N-Clean at a concentration of 1 to 20 or 30 parts water. Considerable sudsing will be noted at this concentration, and in the past this has been an undesirable condition. The suds produced by Safe-N-Clean are really more like a foam, and picked up more easily by the machine than a non-sudsing compound. A non sudsing or low sudsing version of Safe-N-Clean is available, Safe-N-Clean / DF. At this concentration Safe-N-Clean will remove oil, grease, dirt, extrusion compounds, sealants, animal fats, wax products and many more types of soil. In institutional floor scrubbing machines such as hospitals rest homes, office buildings, automobile agencies, public buildings, etc. Use Safe-N-Clean at 1 to 50 or 60 parts water. |
| There are many more applications for Safe-N-Clean Industrial Cleaner Degreaser. When in doubt, try a test spot. On smooth surfaces, spray on and wipe off is usually sufficient. On grained or rough surfaces or where exceptionally difficult stains or soils are encountered, some agitation with an appropriate brush may be required. Where applicable, always wash from the bottom up and rinse from the top down. This will prevent streaking. |
|
|
 |
 |
Info © 2003 SAFE-N-CLEAN • 2281 Graystone Drive • St. Charles, MO 63303 • info@safenclean.com
Toll-Free: 800.253.7426 • Phone: 636.925.3821 • Toll Free Fax: 800.635.9398 • Fax: 636.925.3865
Design ©2010 / Maintenance provided by jWeb New Media Design |
 |
|
