degreasing weld spatter
remove mildew
Industrial Cleaning Products
Weld Anti-Spatter
Cleaning Applications
FAQ Anti-Spatter
About Anti-Spatter
Contact Safe-N-Clean
Newsletter
Employment
MSDS
Spatter Mist Anti-Spatter
stain removal
Newsletter Sign Up
(Industry Updates, Product Updates, News and More!)
Email Address:
cleaner
industrial cleaner degreaser
bilge  cleaning
metal cleaning
September 09, 2010

Heavy Equipment Degreasing:

Oil field equipment, engine blocks, heavy equipment, floors, or any other surface where extra heavy grease deposits occur; mix 1 part Safe-N-Clean to 1 part water. Adding kerosene, solvent or diesel fuel will make an emulsion that gets thicker with repeated stirring. This thickness serves a very important function in that it causes Safe-N-Clean to cling to a vertical surface long enough to get the job done. Once the solution becomes smooth in consistency, apply Safe-N-Clean by a spray method. The Hudson type sprayer is ideal for this purpose. Safe-N-Clean in a solvent emulsion usually works in about 20 to 30 minutes. When grease starts to slide, rinse off with high pressure water. For light to medium heavy degreasing, mix 1 part Safe-N-Clean with 5 parts water and use the same way.

A unique quality of Safe-N-Clean when left on a surface, it will not completely evaporate. Leave the Safe-N-Clean on the surface overnight and wash it down with high pressure water the next day. The results will be the same as if you had finished the job in sequence. If all Safe-N-Clean is thoroughly rinsed off with water, then the metal is left exposed, and subject to rusting and corrosion. To inhibit this occurrence, a light oil film, or a solution of no more then 5 parts water to 1 part Safe-N-Clean, may be applied to the surface, and left to dry.

Steam Cleaning & Hot Water Pressure WasherBathrooms: (Floors, walls, sink, toilet bowl, etc).
Heavy Equipment DegreasingMachine Shops
Rust & Corrosion on Metal SurfacesHotel and Restaurant Cleaning
Eliminate Weld SpatterLubricant
Manufacturing Floor CleanerHand Cleaner
Marine & Shipping IndustryBilge Cleaning
Remove Mildew from Water CraftsAutomotive Cleaning: Trailers, Engines
Safe Cleaning of Plastic SurfacesFloor Scrubbing Machines
Missile WashingElectrical Equipment
Dust ControlWater Treatment
Safe Cleaning of Walls, Woodwork and WindowsMetal Cleaning, Removal of Mill & Processing Oil
USDAFloors
Laundry Compound and Spot RemoverRugs and Carpets
Safe Effective Spot & Stain RemovalGeneral Purpose Cleaner

There are many more applications for Safe-N-Clean Industrial Cleaner Degreaser. When in doubt, try a test spot. On smooth surfaces, spray on and wipe off is usually sufficient. On grained or rough surfaces or where exceptionally difficult stains or soils are encountered, some agitation with an appropriate brush may be required. Where applicable, always wash from the bottom up and rinse from the top down. This will prevent streaking.
Info © 2003 SAFE-N-CLEAN • 2281 Graystone Drive • St. Charles, MO 63303 • info@safenclean.com
Toll-Free: 800.253.7426 • Phone: 636.925.3821 • Toll Free Fax: 800.635.9398 • Fax: 636.925.3865
Design ©2010 / Maintenance provided by jWeb New Media Design