|
|
|
 |
September 08, 2010 |
 |
 |
 |
 Machine Shops:
Safe-N-Clean finds a variety of uses in the machine shop. As a coolant, 1 part Safe-N-Clean to 1 part water-soluble oil added separately to 20 parts water in the sump will eliminate oil curd and congealing. Safe-N-Clean acts as a coolant and keeps the water-soluble oil so evenly dispersed that results are immediately apparent. Additionally, Safe-N-Clean can almost eliminate costly cleaning operations. Because of its built-in cleaning action, it keeps the sumps and pressure lines clean, thus reducing maintenance costs. A mixture of 1 part Safe-N-Clean to 10 parts water is an effective coolant for threading stainless steel pipe. This will normally eliminate overheating and prevent dies from wearing out or burning up quickly. |
| There are many more applications for Safe-N-Clean Industrial Cleaner Degreaser. When in doubt, try a test spot. On smooth surfaces, spray on and wipe off is usually sufficient. On grained or rough surfaces or where exceptionally difficult stains or soils are encountered, some agitation with an appropriate brush may be required. Where applicable, always wash from the bottom up and rinse from the top down. This will prevent streaking. |
|
|
 |
 |
Info © 2003 SAFE-N-CLEAN • 2281 Graystone Drive • St. Charles, MO 63303 • info@safenclean.com
Toll-Free: 800.253.7426 • Phone: 636.925.3821 • Toll Free Fax: 800.635.9398 • Fax: 636.925.3865
Design ©2010 / Maintenance provided by jWeb New Media Design |
 |
|
