|
|
|
 |
September 07, 2010 |
 |
 |
 |
 Lubricant:
Safe-N-Clean can be used as an excellent lubricant on high speed conveyor systems or any system where a good non-pressure lubricant is required. In addition to serving as a lubricant, it also substantially facilitates the cleaning of the system. This can be done simply by washing it down with a garden hose, where it would be necessary to go through a whole cleaning procedure if an oil is used.
For use as a lubricant Safe-N-Clean can be used in its concentrated form or diluted with small amounts of water.
As a coolant/lubricant in tapping use one part Safe-N-Clean to approximately 5 parts water for optimum effectiveness.
As a lubricant for boring precision holes in aluminum castings add Safe-N-Clean to the cutting fluid to obtain cleaner, smoother, finer finished holes. As a lubricant Safe-N-Clean has worked very well as a drawing compound on brass and steel.
In varying concentrations Safe-N-Clean can do many different lubrication role's. Safe-N-Clean may be used as a lubricant to increase the life and efficiency of metal cutting saws. For example, when used as a lubricant in cutting titanium and cold rolled steel, the "splash action" alone will result in a self-cleaning saw blade. With the added advantage of elimination of rust formations. Cleaner cuts will be obtained and saw teeth will remain chip free, without the loading effect. Research has shown that because of bacteria growth in cutting fluids, corrosion begins on parts while being formed on the machines. Bacteria reduces the life span of cutting tools by as much as 40%.
Since Safe-N-Clean is bacteriostatic in nature, it greatly reduces the occurrence of bacteria, solving many associated problems. As a cleaner for sumps, use 1 part Safe-N-Clean to 8 to 10 parts water and circulate for 30 minutes. The same solution may be used for washing down the exterior of the machine while the sump is cleaning. This mixture will destroy existing bacteria, and because of its colloidal action, will remove metal filings that clog pressure lines and pumps. When the operation is complete, drain the sump and rinse to remove metal filings. |
| There are many more applications for Safe-N-Clean Industrial Cleaner Degreaser. When in doubt, try a test spot. On smooth surfaces, spray on and wipe off is usually sufficient. On grained or rough surfaces or where exceptionally difficult stains or soils are encountered, some agitation with an appropriate brush may be required. Where applicable, always wash from the bottom up and rinse from the top down. This will prevent streaking. |
|
|
 |
 |
Info © 2003 SAFE-N-CLEAN • 2281 Graystone Drive • St. Charles, MO 63303 • info@safenclean.com
Toll-Free: 800.253.7426 • Phone: 636.925.3821 • Toll Free Fax: 800.635.9398 • Fax: 636.925.3865
Design ©2010 / Maintenance provided by jWeb New Media Design |
 |
|
