Weld Spatter Mist XP | Anti Spatter Spray Welding | Weld Spatter | Slag Removal
Finally! An anti-spatter with no harmful solvents, odors or fumes–and it really works! Spatter Mist XP produces no fumes or foul odors and does not contain silicone. It will cause no discomfort to welders or surrounding workers!
Always apply Spatter Mist XP in a light mist. A little goes a very long way and it does not build up. When welding is completed, wipe with a damp or dry cloth to remove weld spatter, mill and process oil, and any other dirt or grime in the area. Note: You may find it helpful to spray on a little additional Spatter Mist XP during clean up to loosen caked-on grime. Excellent for slag removal. In most cases, parts are ready for painting at this point. You can also spray your fixtures–especially the copper and brass shunts-with a coating of Spatter Mist for the best electrical conductivity. You can then weld and wipe off as needed.
Looking for a more economical solution? Try our regular Spatter Mist & Slag Remover, a lower concentrate formula, to see if it will fit your unique needs.
You can ask us to send you a free sample by clicking here: Sample Request Form.
Spatter Mist XP comes available in
|275 gallon totes|
|55 gallon drums|
|5 gallon containers|
|1 gallon containers (4 per case)|
|24oz spray bottles (12 per case)|